RA2880A  46~870MHz
RA2880B   5~870MHz

DVB average power, handheld

QAM  digital  signal  and  analogue  signal  test.  It functions   such   as   dual channel measurement, carrier noise ratio measurement, and trunk voltage measurement, V/A, single frequency measurement, etc...  It is state~of~the~art and comes with many features such as: fast processing speed, the low static power consumption, compact and high dependability. It can measure QAM average power as a digital signal level meter.

Compact Design.
5Mhz~870MHz
DVB Average Power
Dual channel; V/A; C/N; TILT tests
1. Frequency Range
Type A: 48~865 MHz
Type B: 5~865 MHz
Frequency Stability: = 50 ppm
Resolution: 10 KHz
2. Analog Channel Signal Strength Measurement
Range: 30~120 dBuV
Accuracy: <2dB
Resolution: 0.1dB
Demodulation Method:  peak value
Bandwidth:  230 KHz+~50 KHz
3. Digital Channel Average Power Signal Strength Measurement
Range: 45~120 dBuV
Accuracy: <3dB
Resolution: 1 dB   
Demodulation Method: average power
Bandwidth: 6 MHz or 8 MHz
4. V/A Measurement
Range: 0~40 dBuV
5. C/N Measurement
Accuracy:  <2.5dB (Input signal = 80 dBuv)
6. AC Voltage Measurement
Range:   AC30 ~ 100V (alarm turns on if over 100V)
Accuracy: <1V
Resolution: 0.1 V
7. RF input impedance
75 ohm
8. Tune Mode
Channel, frequency
9. Attenuator
Automatic
10. Display mode
Wide temperature range, backlight LCD with large character.
Display size: 60 x 44 mm
11. Channel Table
Preset in the meter
12. Power Supply
DC: Hi~MH batteries
AC: use designated charger supplies power and charging
Input voltage: 110 V ~220 V/50/60 Hz +/~10%
Charging time: about 4 hours
13. Working Environment
Working temperature range: ~10 ~ +50
Relative humidity: = 80% RH
Storage temperature range: ~20 ~ +60
14. Dimension
188*93*48 mm
15. Weight
620g (includes batteries)