Digital Signal Level Meter/DVB-C Analyzer

RA2009

Digital Power (Channel Power) Measurement
Signal Types: QPSK, QAM, COMDF, random waveform
Accuracy: ±2dB(0℃~40℃)
Resolution: 0.1dB

QAM Analysis
Modulations type: 16/32/64/128/256QAM DVB-C; ITU-TJ.83-AnnexA/AnnexB
Symbol Rate: 1.00Mbps ~7.00Mbps
Bandwidth: 6MHz~10MHz
Frequency tuner: 50 KHz
MER measurement range: 19~38dB±2dB
BER Pre/post FEC measurement range: 10E-2 to 10E-9

Frequency:
Range: 5MHz—870MHz
Accuracy: ± 50ppm (20°C ± 5 °C)
Resolution: 10kHz

Level Measurement:
Range:20dBuV—120dBuV
Accuracy: LEVEL (> 35dBuV) ±1.5dB (10°C to 30°C)
SCAN ±2dB (10°C to 30°C)
Resolution: 0.1dB
Input Impedance: 75ohm (unbalanced, BNC or F type connector)
Wave detection: peak value

Channel Scan:
Number of Channels: 200 channels max.
Scanning speed: 4 channels / sec
Zoom: 1X, 2X, 4X three levels of magnification or full Channel Plan scan.
Memory: 100 Groups, each group store Max 200 Channels.

Spectrum Analysis:
Bandwidth: Ranging between 10MHz, 25MHz, 50MHz, and full span.

Carrier-Noise Ratio (C/N):
Input range: 70dBuV—105dBuV
Accuracy: ±2dB Resolution: 0.1dB

Digital Channel (Average) Power:
Bandwidth: 0~9MHz
Center Frequency: 5MHz to 870MHz
Digital modulation: QAM, QPSK

Tilt measurement:
Number of channels: 5~12
Resolution: 0.1dB

Trunk Voltage measurement:
Input range: 0-100VAC
Accuracy: ± 1.5V Resolution 0.1V

Others:
Channel Plan:
Number of Channels: 200 channels max.
Number of Learned Channel Plan: 10 max, including 2 user defined.

Audio Output: Built-in speaker

Dimensions: 210mm X 95mm X 50mm

Gross Weight: 1.4kg Net Weight: 0.60kg

Display: 320 X 240 Color LCD with backlight

Power Supply:
Battery: 7.2V 1.6AH Ni-MH battery,
Charger: AC 100V-240V/50Hz
Working Time: Average 4-7 hours (full charged battery).
Charging Time: 5-10 hrs.